Группы

Recent Albums

Most Active Members

Die Casting Supplier by anna xinxinmetal
Active 3 years ago пользователь 1
Basic Information:
  • Die Casting SupplierIntroduces the product of Zinc Die Casting is a kind of pressure casting part. It uses a pressure-casting mechanical die-casting machine equipped with a casting mold to pour liquid zinc or zinc alloy into the inlet of the die-casting machine, and then die-cast by the die-casting machine. Zinc parts or zinc alloy parts of the shape and size restricted by the mold. Such parts are usually called zinc alloy die castings.

    The main characteristics of zinc alloy die-casting are that the melting point of zinc alloy is low, and the melting process of zinc alloy occurs when the temperature reaches four hundred degrees, which is better for forming in zinc alloy die-casting. Zinc alloy does not attract iron during the process of melting and die-casting, and zinc alloy has good casting performance. In the process of die-casting, many precision parts with complex shapes can be made. After the completion of die-casting, the surface of the casting appears very smooth.

    At the same time, the specific gravity of zinc alloy is relatively large. Zinc alloy die-casting technology is widely used in the injection molding process, and its main advantage is to focus on improving the quality of castings. Anyone who understands zinc alloy dies casting knows that in the casting, the runner and the remaining material are part of the casting. In the casting, they have no use-value, but these are still included in the cost of the casting. Simultaneous alloys are also recyclable. Generally, these remaining materials will be returned to the original supplier in exchange for new materials. If the supplier does not carry out good treatment, it will lead to air pollution and environmental hazards.

    There are many ways to recover zinc alloy die-casting, and zinc alloy die-casting is an alloy composed of zinc as the main element, and there are other alloying elements, such as aluminum and copper. The manufacturing process of zinc alloy die casting is usually divided into two types, one is cast zinc alloy and the other is deformed zinc alloy. Each method has different characteristics for zinc alloy casting

    Through the above introduction, Zinc Die CastingManufacturers hopes that you can simply refer to the content of this article in future use.

Ничего не было размещено здесь - быть первым!