5052 aluminum plate specifications

5052 aluminum plate specifications by xuanxuan geng
Active 2 years ago пользователь 1
Basic Information:
  • Aluminum plate thickness: 0.15mm to 50mm, width: 100mm-2000mm, length: 1000mm-9000mm,

    Aluminum coil thickness: 0.05mm to 15mm, width: 15mm to 2000mm
    Insulation Aluminum Plate Thickness: 0.3mm to 0.9mm Width: 500mm to 1000mm Length: No


    Anti-slip Aluminum sheet Thickness: 1mm-10mm Width: 1000mm-1500mm Length: 2000-3000mm
    Embossed Aluminum Sheet Thickness: 0.1mm to 0.1mm Width: 500mm to 1200mm Length: No
    Surface Quality
    1. The surface is not allowed to have cracks, corrosion spots and nitrates.
    2. It is allowed to have peeling defects, bubbles, rough surface and local mechanical damage in the part of the wall thickness whose surface depth is less than 8% of the nominal size, but the depth of the defects is not more than 0.5 mm, and the total area of defects does not exceed 5% of the total area of the plate.
    3. Allow the supplier to grind the longitudinal profile to a smooth surface.
    4. Other requirements: You have a demand side and a supply side.

Ничего не было размещено здесь - быть первым!