Encrusting And Aligning Machine is widely used for material screening in the chemical, building materials, metallurgy and power industries. The quality of its operation is critical to the entire production process, so the daily maintenance of Encrusting And Aligning Machine is necessary.

Encrusting And Aligning Machine is a common source of noise, and abnormal sound often occurs during operation, and the sound level is high, and the sound source is multiple and complicated. What can be done to solve the abnormal sound fault and effectively reduce the noise of Encrusting And Aligning Machine?

Causes and solutions for abnormal noise of Encrusting And Aligning Machine:

When the Encrusting And Aligning Machine is running, if there is any abnormal sound, it should be shut down for inspection immediately to avoid damage to other parts of the screener, or even the production line is stopped. Generally, you can start to check from the following aspects.

Encrusting And Aligning Machine transportation support is not removed, the transportation support should be removed immediately.

If the ring bolt is not locked or the ring is not fully fitted, immediately tighten the nut or lock the copper nut, and hit the ring with a rubber hammer.

The foundation of Encrusting And Aligning Machine is not level, so the foundation should be stabilized. A rubber plate on the base of the bottom cylinder is better.

Encrusting And Aligning Machine spring is broken or dislocated, replace the spring or reset.

Encrusting And Aligning Machine body and the discharge port contact hard objects to make room, the distance is greater than 0.5 meters.

If the fastening bolts of the vibration motor are loose, immediately tighten the bolts of the vibration motor.

Encrusting And Aligning Machine feed inlet and outlet can not be connected rigidly, but flexible or cloth bag connection.

Encrusting And Aligning Machine bearing is damaged, it should be shut down immediately for replacement.

The beam of Cookies Making Machine is broken and should be shut down immediately for maintenance and replacement.