Do not overload the freight elevator

Do not overload the freight elevator by Web star
Active 4 years ago пользователь 1
  • Nowadays, elevators are very common, and the utilization rate is very high. At present, almost every office building has several elevators, and there are also freight elevator. Many people have this in mind that freight elevators are mainly for the transportation of goods, so they are not very polite to the goods; here Webstar is here to tell you that no matter what kind of elevator is the same, you can’t be casual just because it is a freight elevator. Talk about the matters needing attention when using freight elevators.

    1. Must be lightly opened and lightly closed. (Prevent the door rope from coming out of the slot or breaking the door safety switch)

    2. When the elevator is not stuck or malfunctions, do not touch the emergency stop switch. When the emergency stop switch is triggered, the emergency stop light or occupancy light on the elevator panel will light up. Reset the emergency stop switch until the emergency stop light or occupancy light on the elevator panel goes out.

    3. The elevator only has all the hall doors. Turn on the phone or use professional OFF correctly. When it is a hall door is not closed, the elevator has abnormal door panel lights.

    4. When loading and unloading goods, please place it in the middle of the car (≥5㎝ from the side of the car) to prevent the car from getting stuck.

    5. After removing the cargo floor, remove the hall and close it until the call panel or door light goes out to occupy the distance to ensure the normal use of other targets.

    6. When the elevator does not stop on this floor, the hall door mechanical lock will be automatically locked. It is not allowed to open the hall door in any way except for maintenance. It is strictly prohibited to short-circuit the safety control switch of the hall door, and open the hall door to let the elevator system run. If it is found that the elevator is open with the hall door, you should immediately stop learning and use according to the operating conditions, turn off the main power of the elevator and all the hall doors to deal with repairs in time.

    7. Do not overload, specify on the call panel of elevator operation, the weight of the goods should be less than the carrying capacity.

    WEBSTAR freight lift manufacturers is very popular because of its high cost performance. For specific product details, please contact us.

Ничего не было размещено здесь - быть первым!