1100 aluminum sheet is one of the representatives of the 1 series pure aluminum plate, and it is also the most widely used alloy.
1100 aluminum plate is one of the representatives of the 1 series pure aluminum plate, and it is also the most widely used alloy. It is often used in industrial and daily aluminum, and its aluminum content is as high as 99.00%;
1100 Aluminum Sheet With Pvc Blue Film
1100 aluminum sheet has excellent formability, especially in the fully softened annealed condition. It may be suitable for applications requiring bending, rotating, drawing, stamping and rolling. It has good thermal conductivity and is commonly used in heat exchangers and radiators in electrical applications.
Aluminium 1100 is just one of several common aluminium alloys and has a 99.00% aluminium content, with the remaining elements including copper, iron, magnesium, manganese, silicon, titanium, vanadium and zinc.
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Others: Each |
Others: Total |
Al: Min. |
| 1100 | 0.95 Si + Fe | 0.05~0.20 | 0.05 | – | – | 0.1 | – | 0.05 | 0.15 | 99.0 | |
Table Source： 1100 aluminum sheet parameter
AL 1100 also has different performance in different tempers. The following is the performance analysis table of 1100 aluminum sheet in different tempers:
| Conditions | Tensile Properties | ||
| T (°C) | Treatment | ||
| 25 | Aluminum 1100 H12 | Tensile Strength (MPA) | 110 |
| Yield Strength (MPa) | 105 | ||
| Elongation (%) | 12 | ||
| Reduction in Area (%) | |||
| 25 | Aluminum 1100 H14 | Tensile Strength (MPA) | 125 |
| Yield Strength (MPa) | 115 | ||
| Elongation (%) | 9 | ||
| Reduction in Area (%) | |||
| 25 | Aluminum 1100 H16 | Tensile Strength (MPA) | 145 |
| Yield Strength (MPa) | 140 | ||
| Elongation (%) | 6 | ||
| Reduction in Area (%) | |||
| 25 | Aluminum 1100 H18 | Tensile Strength (MPA) | 165 |
| Yield Strength (MPa) | 150 | ||
| Elongation (%) | 5 | ||
| Reduction in Area (%) | |||
| 25 | Aluminum 1100 0 | Tensile Strength (MPA) | 90 |
| Yield Strength (MPa) | 34 | ||
| Elongation (%) | 35 | ||
| Reduction in Area (%) | |||
1100 Aluminum Sheet Produce
Cold working is the most common method of forming aluminum 1100. A cold working process is any metal forming or molding process at or near room temperature.
Aluminum 1100 is one of the softest aluminum alloys and is therefore not used for high strength or high pressure applications.
Related:How to get 1100 aluminum sheets?
| Properties | Conditions | ||
| T (°C) | Treatment | ||
| Density (x1000 kg/m2) | 2.71 | 25 | |
| Poisson’s Ratio | 0.33 | 25 | |
| Elastic Modulus (GPa) | 70-80 | 25 | |
| Tensile Strength (Mpa) | 110 | 25 | H12 |
| Yield Strength (Mpa) | 105 | ||
| Elongation (%) | 12 | ||
| Reduction in Area (%) | |||
| Hardness (HB500) | 28 | 25 | H12 |
| Shear Strength (MPa) | 69 | 25 | H12 |
| Fatigue Strength | 41 | 25 | H12 |
While it is usually cold worked, pure aluminum can also be hot worked, but more commonly aluminum is formed by spinning, stamping and drawing processes that do not require the use of high temperatures. These processes produce aluminium in the form of foils, sheets, rods or bars, sheets, strips and wires.
Aluminum 1100 can also be welded; resistance welding is possible but can be difficult and usually requires the attention of a skilled welder.
| Properties | Conditions | ||
| T (°C) | Treatment | ||
| Thermal Expansion (10 -6/C°) | 23.6 | 25 | |
| Thermal Conductivity (W/m-K) | 218 | 25 | H18 |
| Properties | Conditions | ||
| T (°C) | Treatment | ||
| Electric Resistivity (10 -9 O-m) | 30 | 25 | H18 |
Aluminum 1100 can be formed into many different products, including chemical equipment, railroad tank cars, tailplanes, dials, nameplates, cookware, rivets, reflectors, and sheet metal. Aluminum 1100 is also used in the plumbing and lighting industries, among various other industries.
Same as 1050 aluminum sheet, 1060 aluminum sheet also belongs to 1 series pure aluminum sheet，Commonly used in lithium battery soft connection, bus bar, road sign, charging pile, aluminum gasket, billboard building exterior wall decoration，and so on.
Perforated aluminum sheets are made by aluminum sheets that have been machined with round holes (or other designs). The holes can be in line or staggered to increase the number of openings.
040 Aluminum Sheet is a type of aluminum sheet that has a thickness of 0.04 inches, which is equivalent to 1.016 millimeters. It is a thin and lightweight material
5005 aluminum sheet is a medium-strength aluminum alloy plate, which can reach medium and high strength by cold working, and it has good formability
6061 aluminum sheet is an al-si-mg alloy that has been strengthened by precipitation hardening. 6061 aluminum has a high strength-to-weight ratio, above-average corrosion resistance, good machinability, and is well suited for welding.
If you are looking for top-quality prepainted aluminum coils with various alloy models and specifications, Huawei Aluminum is your ultimate choice.
No.52, Dongming Road, Zhengzhou, Henan, China
Henan Huawei Aluminum Co., Ltd, One Of The Biggest Aluminum Supplier In China Henan,We Are Established In 2001,And We Have rich experience in import and export and high quality aluminum products
Mon – Sat, 8AM – 5PM
Sunday: Closed
© Copyright © 2023 Henan Huawei Aluminium Co., Ltd
Latest Comments
Dear Sir, Please offer your best FOB Prices specs are as under ALUMINIUM STRIP (AL=99.50% MIN) SIZE:450 X32 X6 MM. DIN EN 570 EN-AW 1050 A, QUANTITY=3400KG
Hello, Would you be so kind to offer item as follows: Coil 0,6х1250 (1000)mm EN AW-3105 5tons
Hello, Can you offer me Aluminium plates? Actally I need: 110mm x 1700mm x 1700mm 5083 H111 - 21 pcs Next year planed is 177 pcs
Świetny artykuł. Byłem zachwycony, że wyszukałem ten artykuł. Wielu osobom wydaje się, że mają rzetelną wiedzę na ten temat, ale często tak nie jest. Stąd też moje miłe zaskoczenie. Jestem pod wrażeniem. Zdecydowanie będę rekomendował to miejsce i częściej wpadał, aby zobaczyć nowe rzeczy.
requirement of aluminium strip