The first is cold disassembly. When disassembling smaller U-Joint With 2 Welded Plate Type And 2 High Wing Bearings, you can use a suitable punch to gently tap the side of the bearing ring to remove it from the shaft. A better method is to use a mechanical puller. The grip should act on the inner ring or adjacent parts. If the shaft shoulder and ...

When selecting a U-Joint With 4 Plain Round Bearings, the first thing to consider is the load that the bearing can withstand. There are generally two types of loads on the market, one is the axial load, which is the bearing parallel to the rotating shaft, and the other is the radial load, which is vertical. Bearings on the axis. Each bearing is ...

Universal shaft, also known as Maintenance-Free Universal Joint coupling, is a mechanical part used to connect two shafts in different mechanisms, i.e., the driving shaft and the driven shaft, and make them rotate together to transmit torque. As an important part of China's general machinery industry, cardan shaft products are widely used in ...

Maintenance-Free bearings, as the name implies, refer to bearings that do not require frequent maintenance, and can be used for long-term stable operation from maintenance to failure. Maintenance-free bearings are mainly divided into open type and sealed type. Open-type maintenance-free bearings need to be matched with a maintenance-free design ...

The custom universal joints are key component on the automobile drive shaft. On the front-engine rear-wheel drive vehicle, the universal joint drive shaft is installed between the universal joint output shaft and the input shaft of the drive axle final reducer; while the front-engine front-wheel drive vehicle omits the drive shaft, and ...